The peeling of the rubber layer on wheelchair wheels is a common problem encountered by many users who use wheelchairs for a long time. This situation usually occurs on solid rubber tires or rubber-coated wheels (i.e., metal wheel hubs wrapped with a layer of rubber). Over time, due to sun exposure, rain, frequent friction, or material aging, the rubber will gradually crack, curl at the edges, or even peel off in pieces. wheel chair repair rubber on wheel is peeling This not only affects the smoothness of wheelchair propulsion but may also lead to slipping, abnormal noises, increased vibration, and even damage to the ground or the wheel hub itself.

When you notice the rubber on wheelchair wheels starting to peel, it is not recommended to continue using the wheelchair for a long time. Because the metal wheel hub, without the protection of the rubber layer, will directly contact the ground, becoming extremely heavy and noisy. At the same time, it is prone to slipping on smooth surfaces (such as tiles, wooden floors), posing a safety hazard. In addition, the exposed metal edges may scratch the floor and are also prone to deformation due to collisions, further affecting the stability of the wheelchair.

There are two main ways to solve this problem:

First, replace the entire wheel. This is the most thorough and safest approach. Most wheelchair wheels on the market adopt standard sizes (such as 24-inch rear wheels, 8-inch front wheels, etc.) and can be purchased and replaced individually. You only need to confirm the diameter, width, and axle specifications of the original wheel, and then you can buy a matching new wheel at online medical equipment stores or local assistive device repair points. wheel chair repair rubber on wheel is peeling The price usually ranges from tens of yuan to more than 100 yuan, and the installation is relatively simple, generally requiring only a wrench to complete disassembly and replacement.

Second, attempt temporary repair (only for minor peeling). If the rubber is only partially lifted without complete breakage, you can first sand the loose part with sandpaper, clean and dry it, then use high-strength rubber glue (such as neoprene glue) to re-adhere it, and press it with a heavy object for several hours to cure. However, it should be noted that this repair is only an emergency measure, cannot restore the original performance, and there is a risk of re-peeling. It is recommended to arrange for replacement as soon as possible.

To extend the service life of the wheels, avoid prolonged exposure to the sun, contact with oil stains or sharp objects during daily use, wheel chair repair rubber on wheel is peeling and regularly check the condition of the tires. If the wheelchair is mainly used indoors, you can consider replacing it with all-polyurethane (PU) solid wheels—these wheels have no rubber coating, are integrally formed, wear-resistant, quiet, and will not have the problem of "rubber peeling".

In short, the wheels are the "feet" of the wheelchair, and their condition is directly related to the propulsion experience and safety. Once rubber peeling is found, do not ignore it. Timely replacement can ensure that every movement is stable, quiet, and reliable. Small wheels carry great peace of mind.